EMSWORTH · HAMPSHIRE · WEST SUSSEX01243 850962
FLOORINGINNOVATIONS LTD
Open menu

Care Guide: Keeping Your New Floor Looking Its Best

A practical guide from Flooring Innovations Ltd.

The most effective floor care combines regular cleaning, prompt attention to spills and protection against everyday wear. A few consistent habits can help preserve the appearance of your flooring and reduce the likelihood of avoidable damage.

At Flooring Innovations Ltd, we help customers choose flooring that suits their property and understand how to maintain it after installation. Luxury vinyl tiles, engineered wood, laminate and safety flooring have different care requirements. Knowing which material and finish you have is the first step towards looking after it correctly.

This guide explains how we recommend approaching routine cleaning, furniture protection, stain prevention and longer-term maintenance in homes and commercial premises.

Start with the Care Instructions for Your Flooring

Before choosing a cleaning product, identify your flooring manufacturer, product range and surface finish. An appearance alone cannot reliably tell you how a floor should be maintained.

A wood-effect floor might be engineered timber, laminate or LVT. Genuine timber may have an oiled or lacquered surface, each requiring different maintenance products.

We recommend keeping your installation paperwork and the manufacturer’s care instructions together. These provide the product-specific guidance needed for cleaning, maintenance treatments and any future repairs.

Use this guide alongside those instructions. Where a manufacturer specifies a particular method, dilution or restriction, follow the requirements for your exact floor.

Looking After Your Floor Immediately After Installation

A newly installed floor may need time before normal cleaning, heavy furniture placement or full use can begin. The required period depends on the flooring system, adhesive, preparation products and site conditions.

We advise customers to follow the handover instructions for their installation rather than assuming that a floor is ready for everything as soon as fitting is complete.

During this initial period, take particular care when moving appliances, replacing furniture or allowing other trades into the room. Heavy items should be lifted or moved using suitable protective equipment.

If further building or decorating work is planned, use temporary protection approved for the flooring. Avoid fixing adhesive tape directly to the finished surface unless the manufacturer expressly permits it.

Remove Dust and Grit Before They Cause Scratches

Small particles of grit can act as abrasives beneath shoes, chair legs and furniture. Removing them regularly is one of the simplest ways to protect a new floor.

We recommend a soft broom, suitable dust mop or vacuum cleaner with a clean hard-floor attachment, where approved for the product. Check that wheels and attachments are free from debris.

Busy entrance areas may need daily attention, particularly during wet weather or when a property is undergoing other work. Quieter rooms can usually be cleaned according to their use and visible dirt.

Always remove loose dirt before damp cleaning. Mopping over grit can move abrasive particles across the surface rather than remove them effectively.

How to Clean LVT Flooring

LVT flooring generally benefits from regular removal of loose dirt and controlled damp cleaning with a suitable product.

We recommend using a cleaner approved for the particular flooring, following the stated dilution. Karndean, for example, recommends its own cleaner or a pH-neutral cleaner approved for vinyl flooring. It also advises checking mat compatibility because some synthetic backings can cause discolouration.

Avoid assuming that stronger cleaning solutions produce better results. Excess detergent can leave residue and make the surface appear dull or smeared.

For routine cleaning:

Do not apply wax, polish or a surface dressing unless it is approved for your exact LVT product. Some ranges have specific refresh treatments; others do not require them.

How to Care for Engineered Wood Flooring

Engineered wood has a genuine timber surface and needs care appropriate to its finish.

We recommend relying primarily on dry cleaning, with damp cleaning only when necessary. Use a well-wrung mop or suitable spray-cleaning system so that the surface is lightly dampened rather than soaked. Kährs guidance similarly prioritises sweeping or vacuuming and controlled use of a well-wrung mop.

Oiled and lacquered wood floors require different maintenance approaches. An oiled floor may need periodic treatment with a compatible maintenance oil, while a lacquered surface needs products suitable for its coating.

Do not apply a treatment simply because it is labelled “for wood”. The wrong product can affect the appearance or complicate future maintenance.

We also recommend maintaining the indoor temperature and humidity conditions specified by the flooring manufacturer. Wood responds to its environment, and prolonged extremes can affect its stability.

How to Keep Laminate Flooring Looking Its Best

Laminate flooring should be cleaned according to its product instructions, with particular attention to moisture.

We recommend removing dust and grit regularly, wiping spills promptly and using an approved cleaner with a lightly damp cleaning method.

Water-resistant laminate should still be maintained within its stated limits. A product’s resistance to surface spills does not automatically make every joint, perimeter or underlying layer waterproof.

Avoid saturating the floor or leaving wet cloths and mats in place. Pay attention around entrance doors, pet bowls and appliances where moisture may remain unnoticed.

Laminate cannot be sanded and refinished like a suitable timber floor. Protecting its decorative surface is therefore central to maintaining its appearance.

Cleaning Safety Flooring in Commercial Premises

Safety flooring requires a cleaning routine matched to its texture, use and likely contamination.

In kitchens, washrooms and other demanding areas, a quick pass with a mop may leave residues behind. Grease, detergent and embedded dirt need an appropriate cleaning process.

We recommend following the manufacturer’s instructions for chemical selection, dilution, equipment, contact time and removal of dirty solution. Depending on the premises, this may involve manual agitation or suitable mechanical cleaning. Altro provides dedicated guidance for maintaining its safety flooring.

Do not apply a general-purpose polish or dressing without approval. Any treatment must be compatible with the floor’s intended performance.

For commercial clients, we recommend a written routine that identifies what to use, how to use it and how frequently each area needs cleaning.

Deal with Spills and Stains Promptly

Prompt action usually makes a spill easier to manage and helps reduce staining and slipping risks.

We recommend removing excess liquid with an absorbent cloth, then cleaning any remaining residue using an approved method. Avoid spreading the spill over a wider area.

For a stubborn mark, identify the substance before choosing a treatment. Food grease, ink, paint and adhesive may need different approaches.

Do not experiment with abrasive pads, strong solvents or concentrated chemicals. These can alter the finish or turn a small mark into permanent damage.

If routine cleaning does not remove the stain, seek product-specific advice before progressing to a stronger treatment.

Protect Your Floor from Furniture and Appliances

Furniture can damage flooring through dragging, concentrated weight or grit trapped beneath its feet.

We recommend suitable protective pads beneath movable furniture, checking them regularly and replacing them when worn or dirty. Chairs that move frequently need particular attention.

Lift furniture rather than dragging it. When moving heavy appliances, use appropriate load-spreading protection and assistance.

Castors, furniture cups and protective mats should be compatible with the flooring. Some materials can mark or discolour certain surfaces, while unsuitable wheels can create concentrated wear.

Avoid trapping a floating floor beneath newly added fixed furniture where this would conflict with its installation requirements. Ask for advice before making significant changes to the room.

Choose Suitable Entrance Mats and Rugs

Entrance mats help intercept moisture and grit before they spread through the property. They are especially valuable in hallways, commercial entrances and rooms opening directly onto a garden.

We recommend non-staining mats with backings approved for your floor. Check both the mat and any separate anti-slip underlay.

Clean beneath mats regularly. A mat can protect the floor above while concealing grit or moisture below.

Rugs also need occasional attention. Check for trapped dirt and ensure that the backing does not affect the surface. Where sunlight reaches the room, covered and uncovered areas may change appearance differently over time.

Can You Use a Steam Mop on Your Floor?

Do not use a steam mop unless the flooring manufacturer expressly approves it for your exact product.

Heat and moisture may affect the floor covering, joints, surface finish or adhesive. The fact that a floor tolerates routine damp cleaning does not establish that steam cleaning is suitable.

For most routine care, a suitable mop and approved cleaning product provide a more controlled method. Always check product guidance before introducing powered cleaning equipment or a new treatment.

Pets, Footwear and Everyday Wear

Homes with pets benefit from frequent removal of grit and prompt attention to accidents. Keep feeding areas clean, and choose any protective mat carefully.

Where practical, remove outdoor footwear at the entrance. Damaged heels and grit embedded in soles can mark floors.

Scratch-resistant flooring is not scratch-proof. Sensible protection remains worthwhile even with a hardwearing product.

We recommend checking busy areas periodically rather than waiting for obvious deterioration. Worn chair pads, damaged mats and loose thresholds are easier to address before they contribute to further damage.

A Practical Floor Care Schedule

When Recommended care
As needed Remove spills, grit and visible dirt promptly.
Daily in busy areas Sweep, dust mop or vacuum using suitable equipment.
When cleaning is required Use the approved cleaner and method for the flooring.
Regularly Check furniture pads, mat backings, castors and entrance areas.
As specified by the manufacturer Carry out any approved oiling, refresh treatment or specialist maintenance.

Cleaning frequency should reflect use. A commercial kitchen, family hallway and spare bedroom will require different routines.

When to Ask for Professional Flooring Advice

Persistent lifting, unusual movement, opening joints or recurring moisture should be assessed rather than concealed with a maintenance product.

Surface treatments cannot repair an underlying installation or building defect. Similarly, sanding is only appropriate for engineered wood where the construction and remaining timber thickness permit it.

We recommend seeking advice before attempting repairs or applying unfamiliar products. Retaining spare flooring and installation records can help when a local replacement is needed.

Flooring Aftercare Advice from Flooring Innovations Ltd

At Flooring Innovations Ltd, based in Emsworth, we supply and install flooring for homes and commercial properties across Hampshire and West Sussex, including Chichester and Waterlooville.

We help customers understand the care requirements of their chosen flooring, from everyday cleaning to protection against avoidable wear.

Contact Flooring Innovations Ltd for advice about caring for your installed floor or choosing a suitable replacement. With the correct routine and timely attention to problems, you can help preserve the appearance and performance of your flooring throughout everyday use.